Clippers & Trimmers

Dog clippers are one of the most of the most important pieces of equipment in any dog grooming salon. As this will be one of your main tools it is important to find a set that suit you. Main things to consider are, the weight, the clipper speed, the feel of the clipper and blade compatibility.Trimmers are in essence much lighter clippers, they can be used for very light clipping, however, are best suited to face, feet and sanitary work.If you need some advice, please contact us.


FAQ: Professional Clipper Troubleshooting


1. My clippers are running, but they aren’t cutting the hair. Why?

If your motor is humming but the blades aren't "taking" the hair, check these three things:

  • The Blade Drive: This is the most common failure. The small plastic lever (drive cap) wears down over time. If it’s rounded off, it won't move the blade with enough force.

  • Dirty Blades: Even a tiny amount of grit or grease from an unwashed coat can jam the teeth.

  • Blade Tension: If the spring on the blade itself has weakened, it won't stay flush against the clipper.

2. Why do my clipper blades get hot so quickly?

Heat is caused by friction. If your blades are getting hot within 10 minutes, they are likely bone-dry. You should be oiling your blades every 20 minutes during a groom. If they are still running hot, they may be blunt or have a build-up of "glaze" (dried oil and dander) that requires a professional deep clean.

3. Can I use human clippers for professional dog grooming?

Technically, you can, but they will likely fail within a week. Dog coats are significantly denser than human hair, and "pet" or "human" grade motors aren't built for the high-torque, multi-hour demands of a professional salon. Professional A5 clippers feature interchangeable blades and serviceable parts that "home" clippers simply don't have.

4. How do I know when to replace my blade drive?

If you notice "tram lines" in the coat, or if your clipper sounds louder than usual, your blade drive is likely worn. A fresh blade drive should feel "crisp" and have sharp edges. As a general rule, a busy groomer should change their blade drive every 4–8 weeks.