The Technogroom Big Beastie VSP Dryer is a high velocity double motor dog blaster dryer designed to quickly remove loose hair and excess water from wet dogs.
This plastic housed blaster has been a customer favourite over the years and supplies regularly sell out quickly. The dryer itself has gone through a number of revisions and improvements to improve efficiency an noise levels.
The Big Beastie has a plastic housing two high quality motor, which is the key to wind speed. The air speed of 65 M/S along with a selection of two nozzles is powerful enough to quickly remove water from most breeds of dog, including large heavy coated breeds and can be adjusted with a variable speed stepless transmission.
With a selection of heat settings the Big Beastie can also provide a finish drying function (we would recommend removing any nozzles when finish drying, to allow the coat to be styled as required and to avoid heat building up in the hose)
The Big Beastie is useful for use in different settings:
In the grooming salon, useful for quickly drying bathed heavy coated dogs and as a backup for a finishing dryer.
When showing, helps reduce preparation time and is flexible enough to both blast and finish dry the largest of breeds.
For the pet owner, is a compact dryer that can be used for quickly blasting dry a wet dog after walking/swimming, de-shedding or for home grooming including large heavy coated breeds.
Drawing on our experience of servicing these dryers as well as simply selling, we have deliberately chosen to keep the dryer as simple to maintain as possible, using standard switches and avoiding the use of touch screens which we have found can be problematic.
Features:-
- Power rating of 2800W
- Air Speed of 65 M/S
- Weight 7.3 KG
- Variable Speed, Stepless transmission
- Heating options Hi (67°C) / Low (37°C) / Off
- Noise Level ~ 72db
- Hose length Up to 2M
- Cable Length ~ 2.5M
- Supplied with spare replacement filter
- Printed instruction sheet
- 2 nozzles
This dryers brush life is 600-700 working hours and brushes should be checked and replaced within this time. If required we can perform this for you or can supply brushes to allow service elsewhere.
